Evaluasi Pencucian dan Pengolahan terhadap Kualitas Pasir Silika di PT Bupolo Indonesia
DOI:
https://doi.org/10.36312/mj.v4i2.5323Abstract
Penelitian ini mengevaluasi perubahan komposisi kimia pasir silika antara material pada front penambangan (pit) dan produk setelah pencucian serta pengolahan di PT Bupolo Indonesia, Kalimantan Tengah. Studi menggunakan desain observasional-komparatif deskriptif, bukan eksperimen kausal. Dua titik sampel diambil secara manual pada pit dan dua titik pada stockpile; sampel kemudian diuji di laboratorium PT Sucofindo menggunakan metode Inductively Coupled Plasma (ICP). Naskah sumber melaporkan hasil pit secara individual, sedangkan hasil stockpile tersedia sebagai satu nilai gabungan untuk dua titik sehingga statusnya sebagai sampel komposit atau rerata perlu diverifikasi. Rata-rata pit menunjukkan Fe₂O₃ 0,016%, TiO₂ 0,0385%, dan SiO₂ 99,62%. Pada stockpile, nilai yang dilaporkan adalah Fe₂O₃ 0,018%, TiO₂ 0,140%, dan SiO₂ 99,45%. Dengan demikian, Fe₂O₃ meningkat 0,002 poin persentase, TiO₂ meningkat 0,1015 poin persentase, sedangkan SiO₂ menurun 0,17 poin persentase. Data ini belum mendukung klaim bahwa pencucian dan screening meningkatkan kualitas kimia atau menyebabkan perubahan tersebut karena sampel tidak terdokumentasi sebagai pasangan material yang sama dan tidak tersedia replikasi analitik maupun neraca massa. Proses plant tetap berfungsi untuk klasifikasi ukuran dan penghilangan pengotor fisik yang dapat terpisah melalui air dan pengayakan, tetapi efektivitasnya terhadap mineral pembawa Fe–Ti perlu diuji melalui sampling berpasangan, karakterisasi mineralogi, dan evaluasi recovery–grade.
This study evaluates changes in the chemical composition of silica sand between mine-front (pit) material and product after washing and processing at PT Bupolo Indonesia, Central Kalimantan. The study applies a descriptive observational-comparative design rather than a causal experiment. Two sampling points were collected manually from the pit and two from the stockpile, followed by laboratory analysis at PT Sucofindo using an Inductively Coupled Plasma (ICP) method. The source manuscript reports pit results individually, whereas the stockpile is represented by one combined value for two sampling points; whether this value represents a composite sample or an average requires verification. The pit averages were 0.016% Fe₂O₃, 0.0385% TiO₂, and 99.62% SiO₂. The reported stockpile values were 0.018% Fe₂O₃, 0.140% TiO₂, and 99.45% SiO₂. Thus, Fe₂O₃ increased by 0.002 percentage points, TiO₂ by 0.1015 percentage points, while SiO₂ decreased by 0.17 percentage points. These data do not demonstrate that washing and screening improved chemical quality or caused the observed changes because the samples were not documented as paired material from the same batch and no analytical replication or mass balance was reported. The plant process can still support size classification and removal of physically separable impurities, but its performance for Fe–Ti-bearing minerals requires paired sampling, mineralogical characterization, and recovery–grade evaluation.
References
Abdullah, W. R. (2023). Improving silica sand specifications for making colorless glasses by using chemical and physical methods. Solid State Phenomena, 341, 77–85. https://doi.org/10.4028/p-n97lx4
Alali, J. (2023). Mineral processing of silica sand in Hanout Area/South of Jordan. Open Journal of Geology, 13(7), 667–696. https://doi.org/10.4236/ojg.2023.137029
Bakri, S., Anas, M., Wakila, M. H., & Chalik, C. A. (2023). Geochemical characterization of silica sand in the Sidenreng Rappang area based on X-ray diffraction analysis and X-ray fluorescence analysis. Journal of Geology and Exploration, 2(1), 1–7. https://doi.org/10.58227/jge.v2i1.36
Bouabdallah, S., Chaib, A., Bounouala, M., Dovbash, N., Benselhoub, A., & Bellucci, S. (2023). Recycling of siliceous by-products to reduce their impacts on the environment. Technology Audit and Production Reserves, 2(3(70)), 31–36. https://doi.org/10.15587/2706-5448.2023.277784
Dong, X., Xiong, Y., Wang, N., Song, Z., Qiu, X., & Zhu, L. (2020). Determination of trace elements in high-purity quartz samples by ICP-OES and ICP-MS: A normal-pressure digestion pretreatment method for eliminating unfavorable substrate Si. [Metadata jurnal/volume/halaman perlu diverifikasi dari sumber asli sebelum submit].
Fawzy, M., Mohamed, S. G., & Hamdy, M. S. (2024). Egyptian silica sand-based materials for supercapacitor applications: Towards sustainability. Delta Journal of Science, 49(1), 112–130. https://doi.org/10.21608/djs.2024.322554.1190
Ibrahim, S. S., Fathy, W., Elsayed, M. A., & Boulos, T. R. (2021). Iron bearing minerals flotation from silica sand using hydroxyl surfactants. Journal of Minerals and Materials Characterization and Engineering, 9(4), 327–344. https://doi.org/10.4236/jmmce.2021.94023
Li, S., Liang, Z., Zhou, W., & Chen, J. (2024). Review of upscale quartz sand purification process: From raw material properties to efficient technologies. Mineral Processing and Extractive Metallurgy, 133(4), 171–190. https://doi.org/10.1177/25726641241301583
Liu, C., Wang, W., Wang, H., Zhu, C., & Ren, B. (2023). A review on removal of iron impurities from quartz mineral. Minerals, 13(9), 1128. https://doi.org/10.3390/min13091128
Long, H., Zhu, D., Pan, J., Li, S., Yang, C., & Guo, Z. (2024). Advanced processing techniques and impurity management for high-purity quartz in diverse industrial applications. Minerals, 14(6), 571. https://doi.org/10.3390/min14060571
Meechoowas, E., Suriyoporn, S., Yoocharoenkit, C., & Pleakbaow, S. (2021). The comparison of different sand sources for glass industrial production. Materials Today: Proceedings, 47(12), 3445–3448. https://doi.org/10.1016/j.matpr.2021.03.381
Mohanty, K., Alfonso, P., Oliva, J., Sampaio, C. H., & Anticoi, H. (2025). Perspectives for high-purity quartz from European resources. Minerals, 15(10), 1080. https://doi.org/10.3390/min15101080
Othman, N., Mustaffar, M. I., Ismail, S. A., & Ibrahim, M. H. (2025). A study on the potential of local silica sand for the production of coloured glass. Engineering Headway, 15, 71–77. https://doi.org/10.4028/p-iv4kzi
Popa, F., Marinca, T. F., Neamțu, B. V., Gabor, M., & Chicinaş, I. (2022). Structural, chemical and magnetic characterization of quartz sand from Cluj Area, Romania for future beneficiation in the glass industry. Materials, 15(24), 9026. https://doi.org/10.3390/ma15249026
Sinaiyah, P., Udayakumar, S., Hussin, H., & Ramakrishan, S. (2024). Design of experimental (DOE) analysis of silica sand processing using spiral concentrator. Applied Mechanics and Materials, 918, 65–73. https://doi.org/10.4028/p-zgm9k4
Sobota, I., & Bedeković, G. (2024). The effect of operating variables on the performance of column flotation of silica sand. Minerals, 14(4), 341. https://doi.org/10.3390/min14040341
Sulistiyono, E., Handayani, M., Prasetyo, A. B., Irawan, J., Febriana, E., Firdiyono, F., Yustanti, E., Sembiring, S. N., Nugroho, F., & Muslih, E. Y. (2021). Implementation of sulfuric acid leaching for aluminum and iron removal for improvement of low-grade silica from quartz sand of Sukabumi, Indonesia. Eastern-European Journal of Enterprise Technologies, 3(6(111)), 32–40. https://doi.org/10.15587/1729-4061.2021.226267
Susianti, B., Warmadewanthi, I. D. A. A., & Tangahu, B. V. (2022). Characterization of post-mining soil and solid waste from silica sand purification. Journal of Ecological Engineering, 23(8), 276–288. https://doi.org/10.12911/22998993/151145
Syahrani, A. M., Juniah, R., Syarifudin, Rahmi, H., & Zakir, S. (2024). Analisis peningkatan kadar pasir silika dengan menggunakan magnetic separator untuk memenuhi kebutuhan industri kaca pengaman. Jurnal Sains dan Teknologi: Jurnal Keilmuan dan Aplikasi Teknologi Industri, 24(1), 12–20. https://doi.org/10.36275/gh9wja94
Terzi, M., Kurşun, İ., Çınar, M., & Özdemir, O. (2021). Digital image processing (DIP) application on the evaluation of iron-rich heavy mineral concentrates produced from river sand using a sequential mineral processing approach. Physicochemical Problems of Mineral Processing, 57(3), 21–35. https://doi.org/10.37190/ppmp/134216
Thio, P. R., Koffi, K. B., Konan, K. D., & Yao, K. A. (2021). Production of high-purity silica sand from Ivorian sedimentary basin by attrition without acid leaching process for windows glass making. Journal of Minerals and Materials Characterization and Engineering, 9(4), 345–361. https://doi.org/10.4236/jmmce.2021.94024
Wang, H., Wang, F., Zhao, Y., Xu, X., Wang, B., Fan, Y., Zhang, L., & Guo, F. (2025). Application of quartz LA-ICP-MS analysis in the evaluation of high-purity quartz deposits. Minerals, 15(4), 400. https://doi.org/10.3390/min15040400
Wuletaw, A., & Mihret, B. (2024). Physicochemical and mineralogical characterization of silica sand from the Lemi region, Blue Nile Basin, central Ethiopia: Evaluating industrial applications and resource potential. Heliyon, 10(14), e34426. https://doi.org/10.1016/j.heliyon.2024.e34426
Xie, Y., Li, S., Pan, X., Li, Y., & Zhang, A. (2023). Recent advances in the marketing, impurity characterization and purification of quartz. Minerals and Mineral Materials, 2(4). https://doi.org/10.20517/mmm.2023.17
Yassin, K. E., Mourad, S., Khalil, M. M. H., Abdel-Khalek, N., Elbendari, A. M., Selim, K. A., & Hassan, E. R. E. (2024). Upgrading and surface coating of Egyptian white sand with polymers and silanes. Rudarsko-geološko-naftni zbornik, 39(1), 101–114. https://doi.org/10.17794/rgn.2024.1.9
Zhang, R., Tang, C., & Ni, W. L. (2023). Research status and challenges of high-purity quartz processing technology from a mineralogical perspective in China. Minerals, 13(12), 1505. https://doi.org/10.3390/min13121505
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Wili Yohanes Batara, Hepriyandi L. Djanas Usup, Ferdinandus Ferdinandus , Novalisae, Yos David Inso

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Multi Discere Journal agree to the following terms:
- For all articles published in Multi Discere Journal, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agrees to implement a non-exclusive transfer of publishing rights to the journals.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.