Perancangan dan Implementasi Lifter pada Proses Pemasangan Tangki Bensin untuk Mengurangi Keluhan Muskuloskeletal
DOI:
https://doi.org/10.36312/ej.v6i2.2869Keywords:
Alat Bantu Produksi, Ergonomi, Lifter, Proses Perakitan, Tangki BensinAbstract
PT XYZ merupakan perusahaan manufaktur kendaraan roda 4. Departemen Assembly Production Engineering adalah departemen yang bertugas merencanakan dan membuat proses perakitan kendaraan dapat berjalan. Salah satu proses perakitan kendaraan adalah proses pemasangan tangki bensin, namun dalam proses ini terdapat keluhan muskuloskeletal, yaitu operator merasakan sakit pada tubuhnya setelah bekerja. Hasil survei Nordic Body Map (NBM) menunjukan bahwa 22 dari 28 bagian tubuh terasa sakit dan hasil dari Rapid Entire Body Assesment (REBA) menunjukan bahwa pekerjaan tersebut beresiko tinggi terhadap kesehatan dengan hasil assesment sebesar 10 poin. Root cause dari masalah ini adalah alat bantu produksi yang tidak mendukung ergonomi dalam bekerja. Pada penelitian ini penulis menggunakan metode QCC (Quality Control Circle) 8 langkah perbaikan. Hasil dari penelitian ini berupa alat bantu proses produksi lifter & shutter tangki bensin yang berbasis sistem pneumatik. Dengan menggunakan alat ini proses pemasangan tangki bensin dapat menurunkan hasil REBA menjadi 3 poin yang artinya pekerjaan tersebut beresiko rendah terhadap kesehatan dan survei NBM menurun menjadi 8 dari 28 tubuh yang terasa sakit setelah bekerja. Selain itu alat bantu ini juga dapat menghilangkan masalah tangki bensin tidak turun pada flowrack yang sebelumnya terjadi.
Design and Implementation of a Lifter in the Fuel Tank Installation Process to Reduce Musculoskeletal Complaints
Abstract
PT XYZ is a 4-wheeled vehicle manufacturing company. The Assembly Production Engineering Department is the department in charge of planning and making the vehicle assembly process run. One of the vehicle assembly processes is the fuel tank installation process, but in this process there are musculoskeletal complaints, namely the operator feels pain in his body after work. The Nordic Body Map (NBM) survey results show that 22 out of 28 body parts feel pain and the results of the Rapid Entire Body Assesment (REBA) show that the work is at high risk to health with an assessment result of 10 points. The root cause of this problem is production aids that do not support ergonomics at work. In this study the authors used the QCC (Quality Control Circle) method of 8 improvement steps. The results of this study are in the form of a tool for the fuel tank lifter & shutter production process based on a pneumatic system. By using this tool the fuel tank installation process can reduce the REBA results to 3 points which means the work is low risk to health and the NBM survey decreased to 8 out of 28 bodies that feel pain after work. In addition, this tool can also eliminate the problem of fuel tanks not going down on the flowrack that previously occurred.
Downloads
References
Acosta, M., Vilches, S., Cantú, J., & Chacara-Montes, A. (2019). Implementation of the lean ergonomics approach to process performance improvement. Journal of Microfinance Planning and Control, 10-21. https://doi.org/10.35429/jmpc.2019.15.5.10.21
Akkeesuwan, A., Pochana, K., & Chaiprapat, S. (2024). Developing an observational technique for agricultural ergonomics risk assessment (aera). Work, 80(3), 1387-1404. https://doi.org/10.1177/10519815241291679
Ananda, V. and Wisudawati, N. (2020). Analisis postur kerja pada pengangkutan buah kelapa sawit menggunakan metode rula dan reba. Integrasi Jurnal Ilmiah Teknik Industri, 5(2), 1. https://doi.org/10.32502/js.v5i2.3146
Antandito, D. J., Choiri, M., & Riawati, L. (n.d.). Lean manufacturing approach in furniture production process with cost integrated value stream mapping methods (A case study in PT. Gatra Mapan, Ngijo, Malang).
Asadi, N. and Sadeghi?Yarandi, M. (2024). Investigating the relationship between environmental and cognitive ergonomics with work-related musculoskeletal disorders: a case study in an automobile industry. Work, 1-16. https://doi.org/10.3233/wor-240275
Beatrix, M. and Wijayanto, A. (2023). Posture analysis using the rapid entire body assessment (reba) & nordic body map (nbm) methods to reduce the risk of musculoskeletal disorders (msds) in automotive company. International Journal of Advances in Scientific Research and Engineering, 09(02), 29-35. https://doi.org/10.31695/ijasre.2023.9.2.4
Budiyanto, T. and Setiyoso, F. (2021). Designing an ergonomic-based work facility of dough stirrer for kerupuk cipir using rapid entire body assesment (reba) analysis to reduce muskuloskeletal complaints and increase productivity. Logic Jurnal Rancang Bangun Dan Teknologi, 21(2), 87-92. https://doi.org/10.31940/logic.v21i2.2454
Daneshmandi, H., Kee, D., Kamalinia, M., Oliaei, M., & Mohammadi, H. (2019). An ergonomic intervention to relieve musculoskeletal symptoms of assembly line workers at an electronic parts manufacturer in iran. Work, 61(4), 515-521. https://doi.org/10.3233/wor-182822
Fikri, S. and Nugraha, A. (2022). Usulan perancangan alat bantu perpindahan barang yang ergonomis dari stasiun kerja mesin shearing ke mesin bending di pt.xyz. Jurnal Serambi Engineering, 7(4). https://doi.org/10.32672/jse.v7i4.4635
Firdaus, E. J., & Sujarno, P. A. (2023). Penilaian postur tubuh pekerja dan perbaikan sistem kerja dengan metode RULA dan REBA pada PT. Sharp Electronics Indonesia, 8(2).
Firmansyah, M. and Azwar, A. (2022). Analisis postur kerja dan resiko musculoskeletal disorder (msds) pada operator produksi di konveksi syambia collection. Retims, 4(1), 18. https://doi.org/10.32897/retims.2022.4.1.1779
Haekal, J., Hanum, B., & Prasetio, D. E. (2020). Analysis of operator body posture packaging using Rapid Entire Body Assessment (REBA) method: A case study of pharmaceutical company in Bogor, Indonesia. International Journal of Engineering Research and Advanced Technology, 6(7), 27–36. https://doi.org/10.31695/ijerat.2020.3620
Hawari, N., Sulaiman, R., & Rosalam, C. (2023). Conceptual design, fabrication and validation on prototype of industrial ergonomic trolley-lifter for wood furniture industry. Alam Cipta International Journal of Sustainable Tropical Design & Practice, 16(2), 71-78. https://doi.org/10.47836/ac.16.2.paper08
He, X., Xiao, B., Wu, J., Chen, C., Li, W., & Yan, M. (2023). Prevalence of work-related musculoskeletal disorders among workers in the automobile manufacturing industry in china: a systematic review and meta-analysis. BMC Public Health, 23(1). https://doi.org/10.1186/s12889-023-16896-x
Hidayat, R. and Ahsan, A. (2023). Work posture analysis with reba and rula method on production operators repair and maintenance of lpg 3kg at pt. xyz. Technium Romanian Journal of Applied Sciences and Technology, 17, 301-306. https://doi.org/10.47577/technium.v17i.10091
Hita-Gutiérrez, M., Gómez-Galán, M., Díaz-Pérez, M., & Callejón-Ferre, Á. J. (2020). An overview of REBA method applications in the world. International Journal of Environmental Research and Public Health, 17(8). https://doi.org/10.3390/ijerph17082635
Kumar, G. and Thangavelu, R. (2024). Postural analysis and ergonomic intervention of unorganized workers in indian construction sectors. Work, 1-12. https://doi.org/10.3233/wor-220557
Mandiri, A., et al. (n.d.). Peranan ergonomi di tempat kerja.
Murdiyanto, D., & Santoso, P. B. (2016). Rekayasa sistem informasi manajemen perakitan berbasis group technology untuk mendukung proses assembly frame body bus. Jurnal Rekayasa Mesin, 7(2), 75–85.
Namira, A., Anas, A., Amalia, R., & Tui, R. (2021). Evaluation of achievement of overburden production target using fishbone diagram method at pit a site b pt xyz, south sumatera province. Epi International Journal of Engineering, 4(2), 158-167. https://doi.org/10.25042/10.25042/epi-ije.082021.08
Nidhar, A. and Pramono, A. (2024). Ergonomic chairless chair operator assembly manufaktur otomotif untuk mengurangi gejala musculoskeletal disorders. Jurnal Intech Teknik Industri Universitas Serang Raya, 10(2), 81-88. https://doi.org/10.30656/intech.v10i2.8852
Nizan, N., Ali, N., & Hussain, S. (2024). Managing ergonomic risk assessment among assembly operators in the small?scale fabrication sector. Process Safety Progress, 43(S1). https://doi.org/10.1002/prs.12585
Nugraha, R. and Rahmi, P. (2024). Pengaruh beban kerja dan stres kerja terhadap kinerja karyawan di pt. indoneptune net manufacturing kabupaten bandung. Syntax Idea, 6(7), 3024-303. https://doi.org/10.46799/syntax-idea.v6i7.3870
Nurdin, A., Rusindiyanto, R., & Saifudin, J. (2020). Analisis faktor lingkungan kerja fisik dan penentuan waktu istirahat kerja di pt. xyz. Juminten, 1(6), 37-48. https://doi.org/10.33005/juminten.v1i6.179
Olutade, O., Adeyinka, A., & Durodola, O. (2023). Exploring lean six sigma: a comprehensive review of methodology and its role in business improvement. International Journal of Multidisciplinary Research and Growth Evaluation, 4(6), 939-947. https://doi.org/10.54660/.ijmrge.2023.4.6.939-947
Panjaitan, N., Silitonga, N., Lubis, J., & Faris, M. (2024). Optimization of work posture at pt. xyz: analysis of the rapid entire body assessment (reba) method to improve health and productivity. Logistic and Operation Management Research (Lomr), 3(2), 69-82. https://doi.org/10.31098/lomr.v3i2.2773
Paramawardhani, H. and Amar, K. (2020). Waste identification in production process using lean manufacturing: a case study. Journal of Industrial Engineering and Halal Industries, 1(1), 39-46. https://doi.org/10.14421/jiehis.1827
Putu, A., et al. (2022). Musculoskeletal disorder (MSDs) pada pekerja kantoran di Surabaya. Jurnal Endurance: Kajian Ilmiah Problema Kesehatan, 7(2), 323–328. https://doi.org/10.22216/endurance.v7i2.824
Santos, S., Folgado, D., Rodrigues, J., Mollaei, N., Fujão, C., & Gambôa, H. (2020). Explaining the ergonomic assessment of human movement in industrial contexts.. https://doi.org/10.5220/0008953800790088
Sudahwati, W., Marfuah, U., Setiawan, A., Puspita, D. K., & Ramadhan, A. I. (n.d.). Pengaruh ergonomi terhadap QRM bagi pekerja perakitan mobil produk otomotif. Seminar Nasional Penelitian LPPM UMJ. http://jurnal.umj.ac.id/index.php/semnaslit
Suherdin, S., Rohendi, N., & Sinaga, Y. (2023). Risk factors of musculoskeletal disorders (msds) among productionworkers in bandung city, indonesia. International Journal of Health & Medical Research, 02(11). https://doi.org/10.58806/ijhmr.2023.v2i11n07
Sundar, P., Chowdhury, C., & Kamarthi, S. (2024). Industrial internet of things enabled kata methodology of assembly line productivity improvement: insights from a case study. Processes, 12(11), 2611. https://doi.org/10.3390/pr12112611
Suripatty, P. I., & Dharsono, W. W. (2019). Mengurangi down time mesin filling pada produksi minuman botol dengan menggunakan metode quality control circle di PT XYZ.
Toyota Motor Manufacturing Indonesia (TMMIN). (n.d.). Glossary TMMIN. https://www.toyota.co.id/encyclopedia-glossary
Triana, N. (2022). Working posture analysis for skid tank gas filling process using nordic body map and rapid entire body assessment method. International Journal of Engineering Research and Advanced Technology, 08(02), 01-07. https://doi.org/10.31695/ijerat.2022.8.2.1
W, F. and Sukania, I. (2023). Perancangan alat bantu service sepeda yang ergonomis dengan metode reverse engineering (studi kasus umkm teras38ike). Jurnal Mitra Teknik Industri, 2(2), 210-219. https://doi.org/10.24912/jmti.v2i2.27003
Widodo, L., Ariyanti, S., & Octavia, J. (2019). Peningkatan produktifitas ukm produk sugarwax melalui intervensi ergonomi di stasiun kerja. Jurnal Ergonomi Dan K3, 4(1), 29-39. https://doi.org/10.5614/j.ergo.2019.4.1.5
Wijaya, K. (2019). Identifikasi risiko ergonomi dengan metode Nordic Body Map terhadap pekerja konveksi sablon baju. Seminar dan Konferensi Nasional IDEC.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Yohanes Agung Purwoko, Muhammad Rafif, Andreas Edi Widyartono
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Empiricism Journal agree to the following terms:
- For all articles published in Empiricism Journal, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agrees to implement a non-exclusive transfer of publishing rights to the journals.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
