The Enhancement of Skills Through Eco-Printing Training With Pounding Technique Among PKK Groups in Bangunjiwo Village, Bantul
DOI:
https://doi.org/10.36312/linov.v9i2.1842Keywords:
Ecoprinting, Community Engagement Program, PKK, Pounding Technique, alternative productsAbstract
The objective of this Community Service Program (PkM) is to enhance the skills in creating ecoprinting products using the pounding technique for small business owners or novice entrepreneurs, specifically the PKK women’s group in Bangunjiwo Village, Bantul. This program involves twenty participants and a ten-member organizing committee from UNY's Vocational Faculty's Fashion Design Study Program, including five lecturers and five students. The stages of the PkM activities include needs analysis, preparation, implementation, and evaluation, conducted from March to June 2023. The outcomes of the PkM activities indicate that the feedback from the ecoprinting instructors using the pounding technique averaged 4.2 out of 5.0, categorized as good. The increase in participants' knowledge was obtained with an average N-gain value of 0.56 (56.27%) which was categorized as quite effective. The creativity of the products produced had an average score of 84.5 out of 100. Specific skills that need to be considered to produce high-quality products include recognizing the characteristics and experimental treatment of certain leaves, the type of surface of the pounding tool, the position, and accuracy on the stem and vein ends of the leaves, fabric dyeing strategies, and the patterns produced, as well as drying the fabric naturally or by air-drying. Another important aspect is the creativity in arranging leaves to achieve high artistic value and meaningful aesthetics. The quality of ecoprinting products using the pounding technique requires repeated training and experimentation to produce varied colors from leaf pigments and to select leaves with unique and interesting patterns.
Downloads
References
Adisurya, S. I., Wilastrina, A., & Riyanti, M. T. (2023). Penerapan Ecoprint Dengan Metode Pounding Pada Produk Bernilai Jual Bagi Remaja Karang Taruna AKSARA?: Jurnal Ilmu Pendidikan Nonformal AKSARA?: Jurnal Ilmu Pendidikan Nonformal. AKSARA: Jurnal Ilmu Pendidikan Nonformal, 9(2), 1057–1066.
Amankwah?Amoah, J. (2023). Leveraging Business Failure to Drive Eco?innovation Adoption: An Integrated Conceptual Framework. Corporate Social Responsibility and Environmental Management, 31(2), 1354–1363. https://doi.org/10.1002/csr.2639
Andajani, E. (2023). Water Saving Potential at Small Enterprise: Case Study Mandhegani Eco-Print Surabaya. Iop Conference Series Earth and Environmental Science, 1268(1), 12061. https://doi.org/10.1088/1755-1315/1268/1/012061
Arranz, N., Arroyabe, M. F., Li, J., & Arróyabe, J. C. F. de. (2020). Innovation as a Driver of Eco?innovation in the Firm: An Approach From the Dynamic Capabilities Theory. Business Strategy and the Environment, 29(3), 1494–1503. https://doi.org/10.1002/bse.2448
Aryani, I. K., Wijarnako, B., & Purwandari, R. D. (2022). Tekhnik Eco Print Ramah Lingkungan Berbasis Ekonomis Kreatif Dalam Upaya Menciptakan SDM Masyarakat Mandiri Pasca Pandemi/COVID 19 Untuk Anggota Pimpinan Ranting Aisyiyah (PRA) Desa Karang Cegak Kecamatan Sumbang Kabupaten Banyumas. Jurnal Pengabdian Masyarakat, 3(1), 1–16. https://doi.org/10.32815/jpm.v3i1.461
Chen, Y. S., Chang, C. H., & Wu, F. (2012). Origins of Green Innovations: The Differences Between Proactive and Reactive Green Innovations. Management Decision, 50(3), 368–398. https://doi.org/10.1108/00251741211216197
Faridatun, F. (2022). Ecoprint: Cetak Motif Alam Ramah Lingkungan. Jurnal Prakarsa Paedagogia, 5(1), 230–234. https://doi.org/10.24176/jpp.v5i1.9002
Fidiana, F., Rochdianingrum, W. A., Retnani, E. D., & Widyawati, D. (2020). Eco-Printing?: The Eco-Friendly Economy Empowerment in the Pandemic Era. Pengabdian Kepada Masyarakat, 5(2), 1–6. https://doi.org/https://doi.org/10.35568/abdimas.v5i2.2766
Fransiska, F. (2023). Implementasi Ecoprint Menggunakan Teknik Pounding Pada Fase Fondasi (5-6 Tahun) Di Tk Santa Maria Sintang. Jurnal Pendidikan Dasar Perkhasa Jurnal Penelitian Pendidikan Dasar, 9(2), 594–611. https://doi.org/10.31932/jpdp.v9i2.2864
Hake, R. R. (1998). Interactive-engagement versus traditional methods: A six-thousand-student survey of mechanics test data for introductory physics courses. American Journal of Physics, 66(1), 64–74. https://doi.org/10.1119/1.18809
Ismal, Ö. E. (2016). Patterns from Nature?: Contact Printing Patterns from Nature?: Contact Printing. Jurnal of the Textile Association, 77(2), 81–91.
J?drzejczyk, W. (2022). Stimulating Eco-Innovation Development in Small and Medium-Sized Enterprises: Ecolabnet Eco-Innovation Network. European Conference on Knowledge Management, 23(1), 560–567. https://doi.org/10.34190/eckm.23.1.434
Kholifah, N., Majid, N. W. A., Subakti, H., Putri, G. E., Suyitno, & Zuhri, M. T. (2023). Contribution of Local Product Purchase Policy to Improvement of the 21st Century Learning. WSEAS Transactions on Systems, 22(March), 231–241. https://doi.org/10.37394/23202.2023.22.24
Kholifah, N., Sudira, P., Pardjono, P., Sofyan, H., & Utami, B. (2023). The Transformation of Batik in the 4.0 Industry Revolution: A Case Study in the Clothing Sector. TEM Journal, 12(1), 140–146. https://doi.org/10.18421/TEM121-19
Kholifah, N., Triyanto, T., Sudira, P., Pardjono, P., & Sofyan, H. (2024). The Concept of Transformation Capability for MSMEs Batik Craftsmen in Indonesia. WSEAS Transactions on Business and Economics, 21, 554–564. https://doi.org/10.37394/23207.2024.21.46
Lusiana, B., & Maryanti, R. (2020). The Effectiveness of Learning Media Used During Online Learning. Media Pendidikan, Gizi, Dan Kuliner, 9(2), 81–92. https://doi.org/10.17509/boga.v9i2.38379
Manuja, A., Ojha, I., & Singh, M. (2023). Eco-Printing: Domestic technique of textile printing using the leaves of Rose Indica. International Journal of Engineering Technology and Management Sciences, 7(3), 116–121. https://doi.org/10.46647/ijetms.2023.v07i03.016
Meltzer, D. E. (2002). The relationship between mathematics preparation and conceptual learning gains in physics: A possible “hidden variable” in diagnostic pretest scores. American Journal of Physics, 70(12), 1259–1268. https://doi.org/10.1119/1.1514215
Musdalifah, N., Maulina, R. D., Nurmasitah, S., & Damayanti, A. (2022). The Use of Siam Weed (Eupatorium Odoratum L.) as Natural Dye in Eco-Print With Pounding Technique. Iop Conference Series Earth and Environmental Science, 969(1), 12042. https://doi.org/10.1088/1755-1315/969/1/012042
Nurliana, S., Wiryono, W., Haryanto, H., & Syarifuddin, S. (2021). Pelatihan Ecoprint Teknik Pounding Bagi Guru-Guru PAUD Haqiqi di Kota Bengkulu. Dharma Raflesia?: Jurnal Ilmiah Pengembangan Dan Penerapan IPTEKS, 19(2), 262–271. https://doi.org/10.33369/dr.v19i2.17789
Pancapalaga, W., Fuddin, M. K., Widiatmojo, R., Fathoni, R. A. R., Utari, R. P., & Sulistyowati, T. (2022). Penerapan Teknologi Pewarnaan Ecoprinting Kulit Kambing Samak Krom Pada Usaha Kecil Kerajinan Produk Barang Kulit Di Desa Bululawang. Pengabdianmu Jurnal Ilmiah Pengabdian Kepada Masyarakat, 7(4), 556–563. https://doi.org/10.33084/pengabdianmu.v7i4.3004
Salma, I. R., & Eskak, E. (2022). Teknik dan Desain Produk Ecoprint dalam Berbagai Material Baru (Non tekstil). Prosiding Seminar Nasional Industri Kerajinan Dan Batik 2022, 1–15.
Satria, D., Kartika, Y., Kerajinan, P. P., Sebagai, E., Kreativitas, P., Di, A., Dasar, S., Wonomerto, N., Rahmawati, F., Rahmawati, V. E., Tri, A., Yudha, S., Faizah, A. N., & Suhendri, R. R. (2023). Training On The Making Of Ecoprint Crafts As The Development Of Children’s Creativity At Wonomerto State Elementary School. JIPM:Jurnal Informasi Pengabdian Masyarakat, 1(3), 72–82. https://doi.org/10.47861/jipm-nalanda.v1i3.311
Sulaiman, E., Budiastuti, E., Andita Pratiwi, V., Herlina, E., & Kosasih, A. (2022). Go Green Products Using Ecoprint Techniques. Indonesian Journal of Community Services Cel, 01(01), 56–62.
Susilowati, R. Y. N., Syaipudin, U., Desriani, N., Asmaranti, Y., Kesumaningrum, N. D., & Tubarad, C. P. T. (2023). Pengembangan Potensi Ibu Rumah Tangga Berbasis Kewirausahaan Ecoprint dalam Upaya Peningkatan Ekonomi Keluarga. Jurnal Pemberdayaan Ekonomi, 2(1), 9–19. https://doi.org/10.35912/jpe.v2i1.1441
Triyanto, T., Kholifah, N., Istanti, H. N., & Elvera, R. S. (2024). Pemberdayaan Masyarakat melalui Pelatihan Eco-Printing untuk Menciptakan Produk ToteBag yang Layak Dipasarkan di Desa Terbah , Kulon Progo. 5(2), 1812–1822.
Wahyuningsih, S., Kusumastuti, A., Krisnawati, M., Paramita, O., Yuniar, M., & Furi, M. R. (2022). Quality of Motif, Colors and Fastness of Sekar Ayu Ecoprint Products in Terms of Mordant Type, Natural Dyes, and Types of Leaves on Silk Fabrics. Iop Conference Series Earth and Environmental Science, 969(1), 12043. https://doi.org/10.1088/1755-1315/969/1/012043.
Downloads
Published
Issue
Section
License
Copyright (c) 2024 Nur Kholifah, Triyanto Triyanto, Gina Eka Putri, Noor Fitrihana, Hanifah Nur Istanti, Desfina Mafiroh, Vaisa Ayu Ningrum
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Lumbung Inovasi: Jurnal Pengabdian Kepada Masyarakat is licensed under a Creative Commons Attribution 4.0 International License.
