Uji Porositas dan Kuat Tekan Batako Ringan Berbahan Dasar Limbah Pengolahan Emas (LPE) dengan Filler Pohon Pisang (FPP)
DOI:
https://doi.org/10.36312/e-saintika.v1i2.107Keywords:
Gold Processing Waste, Banana Tree Filler (FPP), Lightweight BatakoAbstract
[Title: Porosity Test and Compressive Strength of Lightweight Brick Based on Gold Processing Waste (LPE) with Banana Tree Filler (FPP)]. Lightweight concrete bricks are made from gold processing waste (LPE) and banana tree filler (FPP) with cement, foam, and clear water. The purpose of making light brick to know the value of porosity and value of compressive strength. Lightweight brick is made with gold processing waste (LPE) and banana tree filler (FPP) consecutively is 250 ml of LPE + 1 layer of FPP, 250 ml of LPE + 2 layers of FPP, 250 ml of LPE + 3 layers of FPP, 250 ml of LPE + 4 layers of FPP . Hardening time is carried out for 22 days in sunlight unspoiled. Tests performed include: density test, porosity test, and compressive strength test. From the test results showed that the porosity value and compressive strength of lightweight concrete bricks with gold processing waste plus the filler of banana trees with the amount of cement in the fixed condition and drying time for 22 consecutive days, the density value 1349, 09 kg / m3, 1290 kg / m3, 1121.6 kg / m3, 1168.3 kg / m3, 1254 kg / m3 and compressive strength value of 2.43 MPa, 1.25 MPa, 1.68 MPa, 2.13 MPa, 1.32 MPa. The high value of porosity and compressive strength value is influenced by the amount of mixture of foam, banana tree filler (FPP) and stirring methodDownloads
References
Balitbang. 2017. Standar Bata Beton Untuk pemasangan Dinding. Jakarta: Departemen Pekerjaan Umum.
Pangga, D., Prasetya, D. S., & Ahzan, S. (2018). Pengembangan bata ringan berbahan dasar limbah pengolahan emas tradisional dengan penguat eceng gondok. Lensa: Jurnal Pendidikan Fisika, 6(2), 90-96.
Prasetya, D. S., Priyambodo, S., & Ahzan, S. (2017). Pembuatan bata ringan berbahan dasar limbah pengolahan emas tradisional di Propinsi NTB. Lensa: Jurnal Pendidikan Fisika, 4(2), 1-3.
PU, D. P. (1989). Bata Beton Untuk Pasangan Dinding. Jakarta: .Badan Standarisasi Nasional.
Riogilang, H. (2009). Pemanfaatan Limbah Tambang Untuk Bahan Konstruksi Bangunan, Ekoton, 9(1), 69-73.
Samua, H. (2009). Karakteristik Untuk Tambang Emas Rakyat Dimembe Kabupaten minahasa Utara. Manado, Laporan Penelitian Jurusan Teknik Elektro Fakultas Teknik UNIMA Manado.
Subandri. (2008). Kajian Bahan Pencemaran Merkuri (Hg) Terhadap Air Sungai Menyuke Dan Gangguan Kesehatan Pada Penambangan Sebagai Akibat Penambangan Emas Tanpa Izin (Peti) dikecamatan Menyuke. Tesis. Semarang: Magister Kesehatan Lingkungan Universitas Diponogoro.
Sujatmiko, B., & Nizarsyah, F. (2015). Analisis Pemanfaatan Bahan Limbah Pada Campuran Batako Ditinjau Terhadap Kekuatan dan Biaya, Jurnal Teknik Sipil Unitomo, 1(1), 13-19.
Tjokrodimulyo, K. (2007). Teknologi beton. Yogyakarta: Biro penerbit KMT FT UGM.
Wikipedia. Batu bata. Retrieved from Wikipedia: https://id.wikipedia.org/wiki/Batu_bata
Downloads
Published
Issue
Section
License
Copyright (c) 2018 Nola Sumbawaty, Sukainil Ahzan, Dwi Sabda Budi Prasetya
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with Jurnal Penelitian dan Pengkajian Ilmu Pendidikan: e-Saintika agree to the following terms:
- For all articles published in Jurnal Penelitian dan Pengkajian Ilmu Pendidikan: e-Saintika, copyright is retained by the authors. Authors give permission to the publisher to announce the work with conditions. When the manuscript is accepted for publication, the authors agrees to implement a non-exclusive transfer of publishing rights to the journals.
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
